Description
100 grams/480 €
250 grams/735 €
1000 grams/972 €
Please contact us for quotes on larger quantities!
Thermoplastic Carbon Paste, Drying Temperature: <100 °C
Thermoplastic carbon paste is a ground-breaking development in the field of photovoltaics that was created specifically for Perovskite Solar Cells. This cutting-edge material, designed to improve the productivity and dependability of the production of Perovskite Solar Cells, combines great electrical conductivity with superior adhesion and processability. The thermoplastic carbon paste, which is an essential part of the solar cell electrode structure, is crucial in fostering the Perovskite Solar Cell technology's explosive growth and uptake. Our carbon paste is specifically designed for screen printing and blade coating applications in Perovskite Solar Cell applications to provide extraordinarily conductive carbon electrode architectures. Superior power conversion efficiency must be attained while taking precautions against potential long-term cell breakdown impacts. The paste has a low sheet resistance of less than 10 /sqr/25 m and speeds up drying at low temperatures (<100 °C).
Technical Properties:
Test |
Properties |
Viscosity (Uncured) |
9-19 Pa.S |
Solids Content (150℃) |
43-46% (130oC,30 min) |
Sheet Resistance (70ºC cure, 20 mins) |
<10 Ω/ /25µm (70oC, 20 min) |
Adhesion |
5B |
Hardness |
7B |
Substrate |
Perovskite solar cells, PET |
Deposition Method |
Flat-bed screen or blade coating |
Screen |
180 mesh PE, 45µm wire diameter, 22.5°, 13 µm emulsion |
Flood Speed |
50 mm/s |
Print Speed |
50 mm/s |
Screen Resisdence Time |
<2 hrs using a print-flood process |
Application:
- Perovskite Solar Cell