Prime FZ-Si Wafer, Size: 3”, Orientation: (100), None Doped, Resistivity: 10000 - 100000 (ohm.cm), 2-Side Polished, Thickness: 380 ± 25 μm

(No reviews yet) Write a Review
SKU:
NG08SW0405
Contact us on sales@nanografi.com

Description

1 piece/99 
5 pieces/372                         
25 pieces/1668                        
 
Please contact us for quotes on larger quantities !!! 

Prime FZ-Si Wafer

Size: 3”, Orientation: (100), None Doped, 2-Side Polished, Thickness: 380 ± 25 μm 

Technical Properties: 

Quality

Prime

Materials

FZ-Si 

Size (inch)

3”

Orientation

(100)

Coating

 

Thickness (μm)

380 ± 25

Doping

 

Resistivity (ohm.cm)

10000 - 100000

Polished

Double Side

Float zone is referred as a very pure silicon that is produced by vertical zone melting.

Compared to Czochralski method, crystals of FZ Silicon have higher purities.

Light impurities in FZ Si wafers provides a chance to control some of the defects and increase the mechanical strength.

Flat zone silicons have very high resistivity distribution so they are specially used in detectors.

There are some other properties that are needed to prevent detector noises.

Some of these properties are minority carrier lifetime and bulk generation current.

However, these two properties weigh less than the crstalline structure and purity of the wafer.

Additionally multiple zone refining can be performed on a rod to further reduce the impurity concentrations.

View AllClose