Quartz Wafer
Production of Quartz Wafers
Quartz monocrystals are formed via hydrothermal synthesis. Inside the vessel (image right) filled with NaOH, quartz feed material is placed in the bottom, usually high quality broken pieces of quartz.
Hereby, quartz crystallizes at a temperature of approx. 400°C and a pressure of 1000 - 1500 bar from a saturated NaOH solution at quartz seed crystals which have a slightly lower temperature than the crushed source quartz at the bottom of the
container.
Quartz growth usually takes hours or days and forms monocrystals up to several kg weight. The quartz monocrystals formed hereby are cut into wafers and finally polished.
Specifications of Quartz Wafers
Crystal Orientation
Quartz is a monocrystalline material with various different crystal directions which define the orientation of the wafer surface.
Typical cuts are „X-Cut“, „Y-Cut“, „AT-Cut“, and „ST-Cut“.
Diameter
Available wafer diameters are 2, 3 and 4 inch. Other diameters or dimensions on request.
Surface
Usually, quartz wafers are double-side polished. Single-side polishing on request
There are no products listed under this category.