MOL-C Dry 207 Grey

(No reviews yet) Write a Review
SKU:
NG06KM02327
Contact us on sales@nanografi.com
Frequently bought together:

Description

Dry Grey Anti-Friction Coatings & Dry Lubricant

Click Here To Demand MSDS and TDS Documents

Product Description

Heat-curing, solid dry-film paint-like lubricants. Dry Grey AFCs are formulated with MoS2 (Molybdenum Disulfide), white solids and epoxy binder for metal-metal pairs for medium to heavy loads/medium fast movements for corrosion protection for automotive, farm equipment and construction applications; and a lubricant for high loads, low speeds, dirty environments and rebuilt equipment.

Dry Grey Anti-Friction Coatings (AFCs), also known as lubricating paints. Anti-Friction Coatings help customers improve safety, reliability and performance by controlling friction and wear, preventing component failures, extending lubrication intervals, and reducing production and operating costs.

 Composition

  • Solid Lubricants
  • Organic Binders
  • Organic Solvents

Features

  • Excellent solution to be used instead of greases & oils for the applications where there is a risk of soiling or usage of grease & oil is not desired.
  • Good & simultaneous protection against corrosion & suitable for permanent lubrication of friction contacts under low speed/high loads
  • This product can be use as an substitute for Molykote A3400

 

Specifications @ As Supplied

 

Type                                      

Anti-Friction Coating

Product ID          

Dry 207 Grey M-3 A3400

Color                     

Grey

Color (L, a, b)      

45,28, 0.24, -2.84

View     

Homogenous

Viscosity (g/m.sec)

18±2 @ 25± 2 C°

Density (g/cm3) 

0,85±0,10

Solid Substance  

120± 1 C°

Brightness           

1.5@20 C°

6.8@60 C°

8.4@85 C°

Curing Temperature         

235 C° @ 45 minutes

Operating Range of the cured film

between -200 C° and 260C°

 More technical details will be available upon request.

Test Standards

  • MIL-PRF-46010G
  • ASTM B499, ASTM B2244, ASTM D3359
  • EN ISO 2812-1, EN ISO 6270-1
  • IEC 60068-2-14
  • ASTM B117, ASTM D3960, ASTM D2244
  • EN ISO 3251

Resistance to Fluids 

Dry Grey successfully passed from Resistance to Fluids test against the fluids:

  • Anti-Aging Fluid
  • Cleaning Compound
  • Regent Water, Ocean Water
  • Hydraulic Oil, Turbine Fuel
  • Lubricating Oil, Lubricating Cleaner

Proven Quality Form Strict Tests

Dry Grey successfully passed from the tests:

  • Thermal Stability Environment
  • Sulfurous Acid/Salt Fog/Salt Spray
  • Surface Appearance

Advantages

  • Dry Grey is a lead free, anti-friction coating which is well suited for automotive applications that include pins, springs, bearings surface and linkages.
  • Dry Grey can also be used in threaded connections, fasteners, servo mechanism and instrument bearings. 
  • Dry Grey is an advanced specialty lubricant formulated to meet a wide variety of demands in automotive applications as well as threaded connections, fasteners and instrument bearings.
  • Excellent lubrication
  • Excellent corrosion protection
  • Good solvent resistance
  • High resistance to fuels & oils
  • Low coefficient of friction
  • Excellent adhesion to metals
  • High load carrying capacity
  • Exceptionally wide service temperature range
  • High abrasion resistance, long service life
  • High competitive strength

Benefits

  • Excellent lubrication
  • Excellent corrosion protection
  • Good solvent resistance
  • High resistance to fuels & oils
  • Low coefficient of friction
  • Excellent adhesion to metals
  • High load carrying capacity
  • Exceptionally wide service temperature range
  • High abrasion resistance, long service life
  • High competitive strength

 Recommended Applications

  • Suitable for permanent lubrication, with simultaneous corrosion protection of friction contacts involving high loads and low speed.
  • Used wherever oils or greases cannot be used for technical reasons or are undesirable because of the risk of soiling.
  • The surface pre-treatment is recommended with either blasting or phosphating which will increase the adhesion of the Dry Grey coating.

Automotive and Industrial Applications

AFCs can be applied in automotive & industrial applications. Dry Grey is an advanced specialty lubricant formulated to meet a wide variety of demands in automotive applications as well as threaded connections, fasteners and instrument bearings.Some of the applications are listed below:

  • Sliding contacts of metal/metal combinations with slow to moderate fast movements and high loads
  • Pins, springs and bearing surfaces in breaks of autos
  • Body hinges and linkages of autos
  • Moving parts in locks, switches, ventilation controls and servo mechanisms
  • Under the hood linkages exposed to dust, moisture, fuels, oils and other contaminants
  • Hinge pins, sleeve bearings and cams
  • Servo mechanism and instrument bearing
  • Threaded connections and fasteners

Recommended Film Thickness:  5-22 µm 

Solubility: Thinning can be carried out using the thinner supplied or recommended by NG Chemicals.  

HANDLING PRECAUTIONS

Please note that this document does not include data on product safety and information for health hazard, physical hazard & before use that need to be read carefully before use that is available with the product. Please read health hazard information, container labels, safety data and product data sheets before handling.

Usable Life and Storage

Shelf Life: 12 Months

(In the condition of keeping it in its original package unopened & as sealed at temperatures between 0 C° and 25 C°.)

 HOW TO USE 

Step 1-Surface Preparation

  • Clean the surfaces before the application
  • Make sure that the surface is degreased
  • Stir the coating before using and applying it
  • Phosphatization or sandblasting increases the adhesion and service life.
  • Stir the coating before using and applying it
  • Apply the coating. The coatings are easy to apply by spraying, dipping, painting or centrifuging.
  • The coating is cured per specifications.
  • After curing, the bonded dry lubricating film provides durable wear protection with a certain level of corrosion protection and resists dust and contamination.

Step 2-Application of AFC

  • Stir the coating before using and applying it
  • Apply the coating. The coatings are easy to apply by spraying, dipping, painting or centrifuging.
  • The coating is cured per specifications.
  • After curing, the bonded dry lubricating film provides durable wear protection with a certain level of corrosion protection and resists dust and contamination.

Step 3-Curing and After Curing

  • The coating is cured per specifications.
  • After curing, the bonded dry lubricating film provides durable wear protection with a certain level of corrosion protection and resists dust and contamination.  

MOL-C Product Range Info Card 

  • mol-c-grey.pngmol-c-grey-2.png

 
View AllClose